Changes

Jump to navigation Jump to search

GCA3A

9,787 bytes removed, 4 May
→‎BN
*IO: RATOC PCI604 (PCI, 1x USB, 1x RS232 DE-9 serial, 2x internal COM header with ribbon cable to V337 RS, REX-PCI60 variant?
*IO: [Namco V337 RS PCB] (above motherboard shield, internal 8pin connector with ribbon cable to RATOC PCI604)
|-
!IO
|-
|
#V337 RC
Simple sound interface. Connects to internal sound header and exposes 1 red/white RCA pair.
*Product: 2626960201 / (2626970201) / RC01933
*Label: V337 RC PCB
*Copyright: 2007 NAMCO BANDAI Games Inc.
*Connectors:
- (external) 1x RCA white, 1x RCA red
- (internal) 1x 3pin audio connector (pinout up-down: GND LEFT RIGHT)
#V337 RS
Simple serial interface board.
*Product: 2626960101 / (2626970101) / RS01369
*Label: V337 RS PCB
*Copyright: 2007 NAMCO BANDAI Games Inc.
*Connectors:
- (internal) 1x 8pin (2x serial, pinout up-down: J2-GND J2-TXD J2-RXD J3-RXD J3-TXD J3-GND J3-CTS J3-RTS)
- (external) 1x 8pin (2x serial, pinout left-right: TXD1 RXD1 GND1 TXD2 RXD2 RTS CTS GND2)
*Ribbon cable product: (2626970301) / RX01187
|}
====BN - N2(WM3R)====
*IO: [ES1(A2)] "SERIAL 3 (CARD IF)" (expansion slot, to motherboard COM4, pinout up-down: GND CTS RTS TXD RXD)
*OS: Arcade Linux / Windows Embedded 7 Standard [Ace Angler]
|-
!IO
|-
|
#H039 ESIF
External serial interface. Connects to motherboard serial, and exposes JVS and serial. Likely turns on/resets the motherboard too.
*Product: 8694960101 / (8694970101) / 10L00373
*Label: H039 ESIF PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "E 14.7456C" "2PH K487H" (14.7456 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 4pin
- (internal) 1x 12pin (to motherboard front panel and motherboard serial header, pinout up-down: JF1-RST-L JF1-RST-R JF1-PWRON-L JF1-PWRON-R JF1-HDDLED-L JF1-HDDLED-R JF1-PWRLED-L JF1-PWRLED-R COM-RTS COM-CTS COM-RXD COM-TXD
- (internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V)
- (internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
|}
====BN - System ES2====
*SSD: Kingston SSDNow V100 SV100S2/32G (SATA 2.5", 32GB)
*IO: [Namco H058 TSIF PCB] (to motherboard COM1, COM2, FRONT PANEL and MIC-IN/LINE-IN)
|-
!IO
|-
|
#H058 TSIF
External interface. Connects to motherboard and exposes a bunch of custom connectors.
*Product: 8920960102 / (8920970102) / 12010769
*Label: H058 TSIF PCB
*Chips:
- FTDI FT232RL (SSOP28, RS-232 to USB transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 3pin (CN3, SERIAL1, to SP3222EUCY, pinout left-right: GND T1OUT R1IN)
- (external) 1x 8pin (CN6, SERIAL2, to CN4, pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1)
- (external) 1x 3pin (CN5, SERIAL3, to CN4, pinout left-right: TXD2 RXD2 GND2)
- (external) 1x 3.5mm (CN2, AUDIO2, to CN1)
- (internal) 1x 4pin (CN1, audio, pinout left-right: LINE2_L FAUDIO_JD LINE2_R GND)
- (internal) 1x 16pin (CN4, serial & front panel, pinout left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 GND2 HDDLED+ HDDLED- PWRLED+ PWRLED- PWRON+ PWRON- RESET- RESET+)
- (internal) 1x 2pin (CN9, power, pinout left-right: 12V GND)
- (internal) 1x 5pin (CN8, USB, pinout left-right: 5V D- D+ D- NC)
|}
=====BN - ES2P(A)=====
*HDD: HGST HTS545025A7E380 (SATA 2.5", 250GB, 5400RPM)
*IO: [Namco H058 TSIFPLUS PCB] (to motherboard COM4, COM3 and CN17)
|-
!IO
|-
|
#H058 TSIFPLUS
External interface. Connects to motherboard and exposes a custom connector, JVS USB, two LEDs, an on-board jumper (JP2, unpopulated) and a switch (SW1, unpopulated).
*Product: 8920960201 / (8920970201) / 140125415
*Label: H058 TSIFPLUS PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "14745 KSS 3LF" (14.745 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 7pin (CN3, SERIAL 3 (CARD IF), pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1)
- (external) 1x USB (CN4, JV IO (JAMMA))
- (internal) 1x 20pin (CN2, serial & front panel, pinout up-down left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 RTS2 CTS2 NC HDDLED+ HDDLED- PWRLED+ PWRLED- JP2+ JP2- SW2+ SW2- NC NC)
- (internal) 1x 4pin (CN1, power, pinout left-right: 5V GND 12V GND)
|}
====BN - System ES3====
*IO: "SERIAL 3 (CARD IF)" (expansion slot, to motherboard, pinout up-down: COM-GND COM-CTS COM-RTS COM-TXD COM-RXD GND 12V?, hooks up to [Namco H055 CARD-IF])
*OS: Windows Embedded 7 Standard (SP1, 64-bit) [MKAGP/Pokken], Arcade Linux [DHR]
|-
!IO
|-
|
#ESIF2
External serial interface, revision 2. Looks identical to the [H039 ESIF](#h039-esif). Connects to motherboard serial, and exposes JVS and serial. Likely turns on/resets the motherboard too.
*Product: 8921960100 / (8921970100)
*Label: ESIF2 PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "E 14.7456C" "2PK D494I" (14.7456 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 4pin
- (internal) 1x 12pin (to motherboard front panel and motherboard serial header)
- (internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V)
- (internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Product: 8918960101 / (8918970101)
*Label: H055 CARD-IF PCB
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
- Hitachi HD64F3062BF25V (QFP100, H8 MCU)
- Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs)
- Sony RC-S620/S (NFC Reader Module via UART)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
- Murata Piezo Buzzer
*Connectors:
- (external) 1x 3pin (CN2)
- (external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - ES3(B)=====
*IO: "SERIAL 3 (CARD IF)" (expansion slot, to motherboard, pinout up-down: COM-GND COM-CTS COM-RTS COM-TXD COM-RXD GND 12V?, hooks up to [Namco H055 CARD-IF])
*OS: Windows Embedded 7 Standard (SP1, 64-bit)
|-
!IO
|-
|
#ESIF2
External serial interface, revision 2. Looks identical to the [H039 ESIF](#h039-esif). Connects to motherboard serial, and exposes JVS and serial. Likely turns on/resets the motherboard too.
*Product: 8921960100 / (8921970100)
*Label: ESIF2 PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "E 14.7456C" "2PK D494I" (14.7456 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 4pin
- (internal) 1x 12pin (to motherboard front panel and motherboard serial header)
- (internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V)
- (internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Product: 8918960101 / (8918970101)
*Label: H055 CARD-IF PCB
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
- Hitachi HD64F3062BF25V (QFP100, H8 MCU)
- Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs)
- Sony RC-S620/S (NFC Reader Module via UART)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
- Murata Piezo Buzzer
*Connectors:
- (external) 1x 3pin (CN2)
- (external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - ES3(X)=====
*IO: "SERIAL 3 (CARD IF)" (expansion slot, to motherboard, pinout up-down: COM-GND COM-CTS COM-RTS COM-TXD COM-RXD GND 12V?, hooks up to [Namco H055 CARD-IF])
*OS: Windows Embedded 7 Standard (SP1, 64-bit)
|-
!IO
|-
|
#ESIF2
External serial interface, revision 2. Looks identical to the [H039 ESIF](#h039-esif). Connects to motherboard serial, and exposes JVS and serial. Likely turns on/resets the motherboard too.
*Product: 8921960100 / (8921970100)
*Label: ESIF2 PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "E 14.7456C" "2PK D494I" (14.7456 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 4pin
- (internal) 1x 12pin (to motherboard front panel and motherboard serial header)
- (internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V)
- (internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Product: 8918960101 / (8918970101)
*Label: H055 CARD-IF PCB
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
- Hitachi HD64F3062BF25V (QFP100, H8 MCU)
- Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs)
- Sony RC-S620/S (NFC Reader Module via UART)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
- Murata Piezo Buzzer
*Connectors:
- (external) 1x 3pin (CN2)
- (external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - ES3(X2)=====
*OS: Windows Embedded 7 Standard (SP1, 32-bit) [Ace Angler]
*OS: Windows Embedded 8(.1?) [DISNEY MAGIC CASTLE まほうのHAPPYミラー]
|-
!IO
|-
|
#ESIF2
External serial interface, revision 2. Looks identical to the [H039 ESIF](#h039-esif). Connects to motherboard serial, and exposes JVS and serial. Likely turns on/resets the motherboard too.
*Product: 8921960100 / (8921970100)
*Label: ESIF2 PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "E 14.7456C" "2PK D494I" (14.7456 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 4pin
- (internal) 1x 12pin (to motherboard front panel and motherboard serial header)
- (internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V)
- (internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Product: 8918960101 / (8918970101)
*Label: H055 CARD-IF PCB
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
- Hitachi HD64F3062BF25V (QFP100, H8 MCU)
- Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs)
- Sony RC-S620/S (NFC Reader Module via UART)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
- Murata Piezo Buzzer
*Connectors:
- (external) 1x 3pin (CN2)
- (external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
====BN - System ES4====
*IO: [Namco H058 TSIFPLUS PCB] (to motherboard COM4, COM3 and PANEL1)
*IO: 1x 6pin (SERIAL4, to motherboard COM5 and COM6, pinout left-right: RXD5, TXD5, GND5, RX6, TXD6, GND6)
|-
!IO
|-
|
#H058 TSIFPLUS
External interface. Connects to motherboard and exposes a custom connector, JVS USB, two LEDs, an on-board jumper (JP2, unpopulated) and a switch (SW1, unpopulated).
*Product: 8920960201 / (8920970201) / 140125415
*Label: H058 TSIFPLUS PCB
*Chips:
- Hitachi HD64F3672 (QFP48, H8 MCU)
- "14745 KSS 3LF" (14.745 MHz crystal)
- Sipex SP485EC (SOIC8, RS-485 transceiver)
- Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
- (external) 1x 7pin (CN3, SERIAL 3 (CARD IF), pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1)
- (external) 1x USB (CN4, JV IO (JAMMA))
- (internal) 1x 20pin (CN2, serial & front panel, pinout up-down left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 RTS2 CTS2 NC HDDLED+ HDDLED- PWRLED+ PWRLED- JP2+ JP2- SW2+ SW2- NC NC)
- (internal) 1x 4pin (CN1, power, pinout left-right: 5V GND 12V GND)
|}
===BN - System BNA===
Anonymous user
Retrieved from "https://emulation.gametechwiki.com/index.php/Special:MobileDiff/86437"

Navigation menu