Changes

Jump to navigation Jump to search

GCA3A

98 bytes added, 2 May
→‎BN
*Copyright: 2007 NAMCO BANDAI Games Inc.
*Connectors:
-(external) 1x RCA white, 1x RCA red -(internal) 1x 3pin audio connector (pinout up-down: GND LEFT RIGHT)
#V337 RS
Simple serial interface board.
*Copyright: 2007 NAMCO BANDAI Games Inc.
*Connectors:
-(internal) 1x 8pin (2x serial, pinout up-down: J2-GND J2-TXD J2-RXD J3-RXD J3-TXD J3-GND J3-CTS J3-RTS) -(external) 1x 8pin (2x serial, pinout left-right: TXD1 RXD1 GND1 TXD2 RXD2 RTS CTS GND2)
*Ribbon cable product: (2626970301) / RX01187
|}
*Label: H039 ESIF PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"E 14.7456C" "2PH K487H" (14.7456 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 4pin -(internal) 1x 12pin (to motherboard front panel and motherboard serial header, pinout up-down: JF1-RST-L JF1-RST-R JF1-PWRON-L JF1-PWRON-R JF1-HDDLED-L JF1-HDDLED-R JF1-PWRLED-L JF1-PWRLED-R COM-RTS COM-CTS COM-RXD COM-TXD -(internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V) -(internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
|}
====BN - System ES2====
*Label: H058 TSIF PCB
*Chips:
-FTDI FT232RL (SSOP28, RS-232 to USB transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 3pin (CN3, SERIAL1, to SP3222EUCY, pinout left-right: GND T1OUT R1IN) -(external) 1x 8pin (CN6, SERIAL2, to CN4, pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1) -(external) 1x 3pin (CN5, SERIAL3, to CN4, pinout left-right: TXD2 RXD2 GND2) -(external) 1x 3.5mm (CN2, AUDIO2, to CN1) -(internal) 1x 4pin (CN1, audio, pinout left-right: LINE2_L FAUDIO_JD LINE2_R GND) -(internal) 1x 16pin (CN4, serial & front panel, pinout left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 GND2 HDDLED+ HDDLED- PWRLED+ PWRLED- PWRON+ PWRON- RESET- RESET+) -(internal) 1x 2pin (CN9, power, pinout left-right: 12V GND) -(internal) 1x 5pin (CN8, USB, pinout left-right: 5V D- D+ D- NC)
|}
=====BN - System ES2P(A)=====
*Label: H058 TSIFPLUS PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"14745 KSS 3LF" (14.745 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 7pin (CN3, SERIAL 3 (CARD IF), pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1) -(external) 1x USB (CN4, JV IO (JAMMA)) -(internal) 1x 20pin (CN2, serial & front panel, pinout up-down left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 RTS2 CTS2 NC HDDLED+ HDDLED- PWRLED+ PWRLED- JP2+ JP2- SW2+ SW2- NC NC) -(internal) 1x 4pin (CN1, power, pinout left-right: 5V GND 12V GND)
|}
====BN - System ES3====
*Label: ESIF2 PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"E 14.7456C" "2PK D494I" (14.7456 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 4pin -(internal) 1x 12pin (to motherboard front panel and motherboard serial header) -(internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V) -(internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
-Hitachi HD64F3062BF25V (QFP100, H8 MCU) -Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs) -Sony RC-S620/S (NFC Reader Module via UART) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver) -Murata Piezo Buzzer
*Connectors:
-(external) 1x 3pin (CN2) -(external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - System ES3(B)=====
*Label: ESIF2 PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"E 14.7456C" "2PK D494I" (14.7456 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 4pin -(internal) 1x 12pin (to motherboard front panel and motherboard serial header) -(internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V) -(internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
-Hitachi HD64F3062BF25V (QFP100, H8 MCU) -Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs) -Sony RC-S620/S (NFC Reader Module via UART) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver) -Murata Piezo Buzzer
*Connectors:
-(external) 1x 3pin (CN2) -(external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - System ES3(X)=====
*Label: ESIF2 PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"E 14.7456C" "2PK D494I" (14.7456 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 4pin -(internal) 1x 12pin (to motherboard front panel and motherboard serial header) -(internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V) -(internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
-Hitachi HD64F3062BF25V (QFP100, H8 MCU) -Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs) -Sony RC-S620/S (NFC Reader Module via UART) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver) -Murata Piezo Buzzer
*Connectors:
-(external) 1x 3pin (CN2) -(external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
=====BN - System ES3(X2)=====
*Label: ESIF2 PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"E 14.7456C" "2PK D494I" (14.7456 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 4pin -(internal) 1x 12pin (to motherboard front panel and motherboard serial header) -(internal) 1x 7pin (to power supply 12V and 5V, pinout left-right: GND GND NC GND 12V 5V) -(internal) 1x 4pin (to JVS expansion card, pinout left-right: V+ D+ D- V-)
#H055 CARD-IF
Banapass card reader. Connects to host via a custom serial port connector, usually labeled "SERIAL 3 (CARD IF)".
*Copyright: 2010 NAMCO BANDAI Games Inc.
*Chips:
-Hitachi HD64F3062BF25V (QFP100, H8 MCU) -Toshiba TD62083AFG (SOIC16, 8ch Darlington Sink Driver for the LEDs) -Sony RC-S620/S (NFC Reader Module via UART) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver) -Murata Piezo Buzzer
*Connectors:
-(external) 1x 3pin (CN2) -(external) 1x 9pin (CN1, SERIAL + POWER, pinout left-right: 12V GND COM-RXD COM-TXD COM-RTS COM-CTS COM-GND NC NC)
|}
====BN - System ES4====
*Label: H058 TSIFPLUS PCB
*Chips:
-Hitachi HD64F3672 (QFP48, H8 MCU) -"14745 KSS 3LF" (14.745 MHz crystal) -Sipex SP485EC (SOIC8, RS-485 transceiver) -Sipex SP3222EUCY (SSOP16, RS-232 transceiver)
*Connectors:
-(external) 1x 7pin (CN3, SERIAL 3 (CARD IF), pinout left-right: 12V GND RXD1 TXD1 RTS1 CTS1 GND1) -(external) 1x USB (CN4, JV IO (JAMMA)) -(internal) 1x 20pin (CN2, serial & front panel, pinout up-down left-right: RXD1 TXD1 RTS1 CTS1 GND1 TXD2 RXD2 RTS2 CTS2 NC HDDLED+ HDDLED- PWRLED+ PWRLED- JP2+ JP2- SW2+ SW2- NC NC) -(internal) 1x 4pin (CN1, power, pinout left-right: 5V GND 12V GND)
|}
===BN - System BNA===
Anonymous user
Retrieved from "https://emulation.gametechwiki.com/index.php/Special:MobileDiff/86211"

Navigation menu