Changes

Jump to navigation Jump to search

PlayStation 2 emulators

81 bytes removed, 11:16, 19 November 2023
m
Pressure Sensitive Buttons
* ''Star Ocean 3'' has a musical item that plays different melodies depending on pressure, and they're required for progressing.
Games requiring variable trigger pressure need physical controllers with analog sticks, but third-party controllers which support variable pressure buttons are rare. To know if your controller supports it, open the LilyPad plugin settings by going to the PCSX2 menu and selecting "Config", "Controllers (PAD)", and "Plugin Settings". At the LilyPad plugin popup, select your gamepad from the list of detected controllers in the "Device Diagnostics" box in the lower left, then click the "Test Device" button.
PCSX2 WXwidgets builds guide; To know if your controller supports it, open the LilyPad plugin settings by going to the PCSX2 menu and selecting "Config", "Controllers (PAD)", and "Plugin Settings". At the LilyPad plugin popup, select your gamepad from the list of detected controllers in the "Device Diagnostics" box in the lower left, then click the "Test Device" button. A small popup window will appear, showing a list of all the gamepad's buttons and their current state. 0.000 = indicates unpressed, 1.000 = indicates fully depressed. Roll either analog stick around. See how the values change from 0.000 to 0.xyz, with the .xyz values shifting incrementally. These changing .xyz values show how the plugin detects different changes in angle as you move the analog stick around. Now press any of the buttons normally used by games, i.e., the triangle/square/cross/circle buttons. See how the values immediately shift from 0.000 (unpressed) directly to 1.000 (pressed) If your gamepad really has pressure-sensitive buttons, you'll see gradual 0.xyz changes as you slowly press each button, just like the different changes in angle as you move the analog sticks around.
Now press any of the buttons normally used by games, i.e., the triangle/square/cross/circle buttons. See how the values immediately shift from 0.000 (unpressed) directly to 1.000 (pressed) If your gamepad really has pressure-sensitive buttons, you'll see gradual 0.xyz changes as you slowly press each button, just like the different changes in angle as you move the analog sticks around.If the buttons change from 0.000 directly to 1.000, that proves your gamepad buttons aren't pressure-sensitive and are merely tracking the pressed/unpressed state. The solution would be to either buy an official DualShock 2 or 3 controller (The Original Xbox Controller is not supported) and use an appropriate 3rd party driver such as [[SCP Driver Package]].
The solution would be to either buy an official DualShock 2 or 3 controller and use an appropriate 3rd party driver such as [[SCP Driver Package]] or Also you can map the button to a rarely used trigger/stick in LilyPad this way:; An additional button needs to be mapped to circle as well but configured to deliver "light" pressure. This is done by opening Open the gamepad plugin configuration and choosing a rarely used key - for example, the lower shoulder button L2 - and remapping it to the circle button and setting the sensitivity to 0.500 or thereabouts. In the game, merely use the remapped L2@circle button to deliver "light" tap/hold tunes, while the regular circle button can be used normally to deliver "hard" tap/hold tunes. The Original Xbox Controller is not supported.
See:
11,659
edits

Navigation menu