Difference between revisions of "PS3 modding"
(Created page with "First off, '''you must have a PS3 on FirmWare 3.55, or lower, to mod it.''' If you are on a lower FW, then simply [http://www.mediafire.com/?sm8kd6liqzj3jo5 upgrade to 3.55]. ...") |
|||
Line 46: | Line 46: | ||
|No | |No | ||
|} | |} | ||
− | Basically, all fat models are downgradable, if you have a [http://www.ps3devwiki.com/index.php?title=Flash_%28Hardware%29#NAND NAND] model (CECH-A to CECH-G) use Teensy++ | + | Basically, all fat models are downgradable, if you have a [http://www.ps3devwiki.com/index.php?title=Flash_%28Hardware%29#NAND NAND] model (CECH-A to CECH-G) use Teensy++ and if you have a [http://www.ps3devwiki.com/index.php?title=Flash_%28Hardware%29#NOR NOR] model (CECH-H to CECH-Q or any downgradable slim PS3) use E3 Flasher. For downgrading I suggest you follow a tutorial: [http://www.ps3hax.net/showthread.php?t=39766 Using Teensy++/Progskeet] or [http://www.ps3hax.net/showthread.php?t=33989 Using E3 Flasher] |
Also, once you are on FW 3.55 you'll have to enter Factory Service Mode, to do that either [http://www.ps3hax.net/showthread.php?t=33989 follow this] (see Chapter 2, Part 1), or use one of [http://www.ps3devwiki.com/wiki/Talk:Downgrading_with_PSgrade_Dongle these devices]. | Also, once you are on FW 3.55 you'll have to enter Factory Service Mode, to do that either [http://www.ps3hax.net/showthread.php?t=33989 follow this] (see Chapter 2, Part 1), or use one of [http://www.ps3devwiki.com/wiki/Talk:Downgrading_with_PSgrade_Dongle these devices]. |
Revision as of 04:47, 30 March 2013
First off, you must have a PS3 on FirmWare 3.55, or lower, to mod it. If you are on a lower FW, then simply upgrade to 3.55. However, if you're on a higher FW, then you must downgrade using a hardware Flasher. Below is table for what models are downgradable and what flashers can be used on those models:
PS3 Model # | Downgradable | Progskeet | E3 Flasher | Teensy++ |
---|---|---|---|---|
CECH-A to CECH-G |
Yes | Yes | No | Yes |
CECH-H to CECH-Q | Yes | Yes | Yes | Yes |
CECH-2xxx |
Yes | Yes | Yes | Yes |
CECH-25xx | Check | Yes | Yes | Yes |
CECH-3xxx | No | No | No | No |
CECH-4xxx | No | No | No | No |
Basically, all fat models are downgradable, if you have a NAND model (CECH-A to CECH-G) use Teensy++ and if you have a NOR model (CECH-H to CECH-Q or any downgradable slim PS3) use E3 Flasher. For downgrading I suggest you follow a tutorial: Using Teensy++/Progskeet or Using E3 Flasher
Also, once you are on FW 3.55 you'll have to enter Factory Service Mode, to do that either follow this (see Chapter 2, Part 1), or use one of these devices.