|Type||Home video game console|
- For other emulators that run on PS1 hardware, see Emulators on PS1.
The PlayStation (frequently referred to in shorthand as the PS1) is a fifth-generation console released by Sony Computer Entertainment on December 3, 1994, in Japan and September 9, 1995, in the US. It was retailed for $299.99. It had an R3000 CPU (which was used by NASA to take pictures of Mars because of its reliability) at 33.8688 MHz with 2 MBs of RAM and 1 MB of VRAM. It used a proprietary MDEC video compression unit integrated into the CPU, allowing for playback of full-motion video at a higher quality than other consoles of its generation. It had better stereo sound than that of other stereos at that time.
It was a commercial success, partly due to being relatively easy to program for compared to other consoles at the time and because its CD-based media was cheaper than the competition.
PlayStation emulation has been available since the late 1990s, and was generally better than the comparable Nintendo 64 offerings despite the use of a plugin system. The plugins and emulators were often closed-source, rarely updated, and of questionable accuracy, but new offerings emerging starting in the mid-2010s offer high accuracy, many enhancements over the original hardware, or both.
|PC / x86|
|✗||✗||~[N 1]||✓||✓||~[N 2]||High||✓||✓||✓||✓|
|✗||✗||✗||~[N 3]||~[N 3]||~[N 2]||High||~[N 4]||✓||✓||✓|
|~[N 7]||✓||~[N 8]||~[N 9]|
|NO$PSX||2.2||✗||~[N 10]||✓||✗||✗||✗||Mid-High||✗||✗||✓||✗ (WIP)|
|PCSX-Redux||Dev Builds||✗||✗||✗||✗||✗||✗||Mid-High||✗||✓||✓||✗ (WIP)|
|hpsx64||v0400 (Alt)||✗||✗||✗||✗||✗||✗||Mid||✗||✓||✓||✗ (WIP)|
|MAME||git artifacts[N 11]
|~[N 12]||✓||✗||✗||✗||✗||High||✗||✓||✓||✗ (WIP)|
|Mobile / ARM|
|Mednafen[N 14][N 15]||Beetle/Beetle HW||✗||✗||✗||~[N 3]||~[N 3]||~[N 2]||High||~[N 4]||✓||✓||✓|
|Official Sony emulators
|✗||~*||?||✗||✗||~[N 17]||Mid-High||~[N 17]||✗||✗||✓|
- ↑ No support for PlayStation Link at the moment but there is a Duckstation fork for GGPO implementation.
- ↑ 2.0 2.1 2.2 Both DuckStation's texture-replacement-PR and beetle-psx-hw-libretro (mednafen_psx_hw_libretro) support this feature but still work-in-progress/experimental and incompatible with each others implementation.
- ↑ 3.0 3.1 3.2 3.3 RIR and PGXP exclusive to Libretro's "beetle-psx-hw-libretro" (mednafen_psx_hw_libretro) core but comes with significant issues. Recommended to use DuckStation for RIR and PGXP; otherwise use the mednafen standalone or Beetle SW (mednafen_psx_libretro).
- ↑ 4.0 4.1 4.2 Only available on libretro core
- ↑ 5.0 5.1 Possible with PK201.
- ↑ Only available with PGXP build
- ↑ PCSX-ReARMed supports RetroAchievements.
- ↑ PCSX-ReARMed fork is still active.
- ↑ If you have a potato/low-end tier setup or incompatibility issues with DuckStation/SwanStation, mednafen/Beetle/Beetle HW or XEBRA try your luck with PCSX-ReARMed.
- ↑ Possible with NO$GBA
- ↑ CI-Windows CI-Linux CI-Macos
- ↑ MAME 0.252 version compatibility status: KONAMI System 573, KONAMI Twinkle, namco System 10, namco System 11, namco System 12, Capcom ZN-1/2
- ↑ 13.0 13.1 No UWP or APK build for DuckStation's texture-replacement-PR at the moment.
- ↑ 14.0 14.1 14.2 Only available on mobile as a libretro core (e.g., RetroArch).
- ↑ Needs a high-end phone/tablet to run at full speed.
- ↑ 16.0 16.1 Payware. Recommended that you use patched versions.
- ↑ 17.0 17.1 No PSX game has trophy support or enhancements for PS2/PS3 or PSP/Vita backwards compatibility but PSX games that received HD ports, do.
- DuckStation (compatibility) (unofficial compatibility)
- Quickly became a top contender on the basis that it has high compatibility and a built-in GUI. Its stated goal is to be "as accurate as possible while maintaining performance suitable for low-end devices." While PCSX-R has long dethroned ePSXe in features, DuckStation is the first to address all the shortcomings of plugin-based offerings thus far, as all of its features are available out-of-the-box, and no configuration is necessary to get games running outside of obtaining the original system firmware. The graphics emulation core has modern enhancements built-in like PGXP, upscaling, texture filtering, hardware (D3D11, D3D12, OpenGL, Vulkan) and software rendering (both of which have true color (24-bit) support). It also natively supports MAME's Compressed Hunks of Data (CHD) format, which shrinks the size of CDs losslessly while also storing all of its data under a single file. An Android version is also available, although it doesn't have feature parity with the desktop builds. The unofficial libretro core (swanstation) and standalone version are Retroachievements-compatible.
- Is focused on accuracy, which makes it very compatible. It's even been known to outperform Sony's official PS1 emulator in accuracy tests. However, there are a few hurdles to using it; it requires a specific BIOS for each region, and the program interfaces from a shell only; it has no GUI. You can still drag-and-drop CUE files into the executable to load games, and the program will log errors to a text file called
stdoutwhenever a crash happens. External GUI launchers are available.
- Beetle PSX
- This fork by the RetroArch developers has several experimental modifications and enhancements that aren't present in the standalone version, including a widescreen hack, CPU overclocking for smoother framerates, and increasing the internal resolution up to 8x. Increasing the resolution carries a heavy performance cost, however, since graphics are rendered in-software, an alternative core exists for hardware rendering. See this 2018 guide for setting up Beetle HW in RetroArch.
- An emulator made in Japan that has high compatibility. The UI is in English, but because it's not the developer's native language, some of the naming conventions may seem weird compared to other emulators (for example, the BIOS is referred to as OSROM). Luckily, there's a guide that helps explain how each option works. Games that require subchannel data are not supported, but most other games run flawlessly.
- Uses "Nymashock" core for PSX emulation (ported from mednafen to Bizhawk by zeromus).
- Has two versions, but standard users will want to use the cut-down gaming version. Made in the same style as NO$GBA, where it handles the PocketStation, it offers decent compatibility with very low-spec requirements – the programmer's philosophy is to deliver a working application out of the box.
- Latest iteration of PCSX but without plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Heavily focused on development, debuggability, and reverse engineering, but still perfectly usable to run PlayStation 1 titles.
- An open-source, plugin-based emulator based on PCSX-df, itself based on PCSX. It is no longer recommended, as DuckStation has all the same benefits as PCSX-R without needing to use forks or old plugins.
- An ARM fork whose biggest draw is its NEON software renderer, which is both fast and accurate and can render at higher resolutions without resorting to HLE plugins. It was given the seal of approval by Sony after being used in the official PlayStation Classic emulation box.
- Despite having widespread name recognition, it is unfortunately not an emulator we recommend using on PC anymore. The source code is closed, meaning development is beholden to the original developers. Updates have brought it on par with PCSX-R, but that isn't enough. They are also selling a paid Android port.
- A simpler emulator with a lot of compatibility issues. Development has been halted, and it remains closed-source. It's really only useful for very old toasters.
- Was slated to become an open-source, full-system emulator like DuckStation, with the caveat being that it could load games without a BIOS. That never panned out, as development has largely stopped.
- By nature of supporting arcade systems similar to the PlayStation, MAME's "Sony PlayStation" driver (
psj) is considered "preliminary", but it works; it can boot to the BIOS and launch games but expect bugs, especially between hardware revisions. The MAME project as a whole remains active, but there's no incentive for any of its developers to work on the PS1 driver.
- Support for a hardware feature has been merged into the main project, allowing the same backward compatibility with PS1 games. However, one thing to note is that backward compatibility in the original PS2 hardware didn't even cover all the games in the PS1 library, and these limitations carry forward to PCSX2's emulation.
- POPS (short for PlayStation On PSP System) is Sony's official PS1 emulator for their PlayStation Store releases. It utilizes EBOOTs, a form of binary file for PSP, instead of BIN/CUE disc dumps, which can be made using a converter if desired. Compatibility is very high due to similar hardware design; although the GPU is emulated, the CPU is close to the PS1 and would naturally speed up performance on its own. It includes support for multi-disc games (within the one EBOOT). Only the native PS1 resolution is supported, with games being stretched to fit the screen as the user wishes.
- PCSX-ReARMed is only available on mobile as a libretro core (e.g., RetroArch). It can run on various handheld consoles with fairly strong specs, like the PlayStation Vita, the Nintendo 3DS, and the Nintendo Switch. This emulator in the libretro build initially used the P.E.Op.S. graphics plugin (reasonably accurate, but slow) from the mid-2010s to 2019; now it uses a port of PCSX4ALL's Unai renderer, which is less accurate, but much faster (e.g., 10-20 FPS faster). The CHD compression format, which shrinks disc images into more manageable sizes, is enabled on this emulator on the 3DS. These images will load and run much faster than '.bin/.cue' files - greatly reducing framerate dips, i.e., in FMVs & loading zones.
- PS2PSXe is an unofficial PS1 emulator for the PS2. However, compatibility is very low. Double disc swapping (using the same method as a real PS1) is required for PS2s with model numbers SCPH-100xx - SCPH-390xx.
- The PlayStation 3 has a built-in software emulator with very high compatibility, which is used for PS1 releases on the PlayStation Store and for handling PlayStation discs.
- WiiSX is a port of PCSX to the Wii. Compatibility is fairly low due to the weak power of the Wii and the differing hardware designs that make PowerPC requirements a little stronger. It's generally not worth using since it doesn't get updated.
The PlayStation takes shortcuts when rendering as a result of making most of the hardware available. This can cause some quirks that become even more noticeable when the internal resolution increases.
Polygons may jitter as a result of low-precision, fixed-point (to the native resolution) math, but this is mostly unnoticeable at native resolutions. Emulators that can increase the internal resolution of games have attempted to fix this.
There is no z-buffer in the hardware. This can cause things like polygons to pop over others; the limbs of Tekken characters are a good example of this. It is theoretically possible to implement this, but it wouldn't be accurate to the hardware.
When perspective correction isn't applied to textures, certain viewing angles can make them distorted, more so when an object is near the edge of the camera up close. Tenchu: Stealth Assassins is particularly infamous for texture distortion, most noticeably in the training level where floor textures appear wavy at oblique angles; developers typically mitigate this by adding polygons to walls, floors, and other scenery, though at the cost of filling the PlayStation's geometry rate. This has been solved in at least one emulator.
Many PlayStation games dither to varying degrees due to having a low color depth. On most TVs, this dithering would blend in order to make new colors and smooth gradients. Plugin-based emulators usually have graphical plugins that use a 32-bit color depth, which removes dithering, while software-rendered plugins and emulators tend to retain it. While higher color depth can be considered an enhancement since it results in less noise and smooth gradients, some think of dithering as seen on real hardware as added shading and texture, especially on untextured polygons. The emulators that use software rendering and can increase the internal resolution of games can retain dithering for the shading and texturing aspect, and it's made more subtle by shrinking the artifacts.
Less-notable games using special peripherals
ZXE-D: Legend of Plasmalite requires the use of a special peripheral to play the game. It is a robot with connectable parts that plug into the memory card slot, which is then replicated in the game. No emulator has ever focused on it, probably due to a number of reasons:
- It's not a well-known game.
- No third-party controller and memory card connector has gotten support from emulators the same way that Nintendo's official GameCube controller adapter has.
- To emulate this purely in software means it has to be reverse-engineered, which can take a bit of time.
PS1 games use the CD-ROM XA (eXtended Architecture) format, which is based on CDi and allows developers to use both CD-ROM and CD-DA (audio) tracks on the same disc.
Certain image formats and CD dumping methods don't support this format correctly and end up with the CD-DA tracks missing or corrupted, hence no audio. The ISO format in particular only stores the content of a CD-ROM filesystem and cannot store CD-DA tracks at all. So it's generally a very bad idea to use ISO for PS1 games (even though it should work for single-track games). Even running an ISO file based on a PS1 game (i.e., Ridge Racer, Tomb Raider 1-2) with CD-DA audio may often cause an emulator such as ePSXe and other peers to freeze and/or hang up, especially during loading of a saved data or in-game levels and transactions.
- However, a mounted image (Using Daemon Tools), running from a CD-ROM or using the Mooby2 plugin can solve these CD-DA problems. The MDS/MDF format is good for backing up the CD-DA, audio-equipped PS1 games. However, the best Image format for any PS1 game is the CUE/BIN format. The reason being that almost all the burning programs can read it, and the relevant patching programs (i.e., PPF-O-Matic) are designed for that format. Clone CD images in IMH/CCD format provide another ideal option as it has virtually the same structure as CUE/BIN format (The IMH file is the same data as a BIN file at the hex level). However, the available burning programs are largely unable to read Clone CD format. ISObuster and ImgBurn are good tools for some of the aforementioned notes.
- The European regional versions of many PS1 games tended to have copy-protection embedded, so they could cause problems with backing up images. These game backups could cause hangs or show a black screen infinitely in a typical emulator. An easy way to avoid that problem is to try the US regional versions. Another way is to patch it using a .sbi file which contains the protection information needed to run the game.
- The perfect solution possible, at least for the ePSXe emulator—and perhaps other similar plugins-based emulators—would be (No virtual drive mounting needed)::
- 1. Use the Mooby2 2.8 CD-ROM plugin, and uncheck 'subchannel reading' in the plugin's settings.
- (Just in case: also make sure 'repeat all cdda' is checked, and 'cdda volume' is set to something like 50 or 60, or else you won't hear anything.)
- 2. Launch the game with File -> Run CDrom (browse, find and select your CD image as the window pops up.)
- It's recommended you use the Eternal 1.41 sound plugin with default settings along with this. The SaPu CDRom Plugin v.1.0/1.3 is good if you're running official CDs. It especially works well with Daemon Tools Lite or Alcohol 120% when mounting an image).
- If running ePSXe or a similar emulator on an old Windows OS (E.g., 9x, ME, 2000, XP), use ForceASPI to initialize the ASPI layer (For your disc drive) and a plugin like P.E.Op.S. CDR Version 1.4 plugin or similar. Then set the plugin to "W2K/XP IOCTL scsi commands" before running your PS1 CDs.
Densha De Go! controller
Also available for the Nintendo 64, Densha De Go! is a Japan-only train simulator released by Taito that is compatible with an optional special controller. No emulator is known to support it.
Namco System 11/12
Namco System 11/12 is an arcade system based on Sony Playstation hardware, with surface-mounted ROM chips as storage rather than CD-ROM.
MAME and ZiNc provides support for this variation.
Capcom ZN-1/2 is an arcade system based on Sony Playstation hardware, with ROM chips as storage rather than CD-ROM and an extra Capcom Qsound chip for audio.
MAME and ZiNc provides support for this variation.
Konami Twinkle is an arcade system based on Sony Playstation hardware, designed for Beatmania IIDX series games, with an extra hard disk for storing (lots of!) sounds and a DVD player for full-motion video.
MAME supports this variation, but the full-motion video won't be shown in the game because the DVD video decoder is yet to be emulated. However, A fork of MAME reads mpg videos as background animations from
iidx_videos folder under the root folder of MAME (like how LaserDisc game emulators work), which would solve the issue of lacking full-motion video at the sacrifice of orthodox emulation.
- PlayStation DataCenter - Tons of PS1-related things. Emulator files like plugins, game manuals, game configurations, and many tutorials are just some of the things you'll find here.
- ReDump PS1 USA set.
- PS1 Strengths and Weaknesses vs. N64 and Sega Saturn (Journal feature at www.Racketboy.com. October 17th, 2017.)
- Graphics comparison table (for Saturn as opposed to PS1, N64, Sega Model 2 arcade hardware and 1995-era PC)
- ↑ http://psx.silvanthalas.com/psx.html
- ↑ Plugin info, news. / Information about the plugin, news. (gpuBladeSoft discussion). forum.emu-russia (2011-09-16)
- ↑ List of PlayStation games with CD-DA (From deprecated Wikipedia article - dated 11/27/2016)
- ↑ ECM And APE Guide. www.epforums.org (2011-Feb-16; Last edited: 2017-Jan-15)
- ↑ Densha de Go! gameplay with controller - Playstation PS1. Youtube (2017-05-05)