Game problems FAQ

From Emulation General Wiki
(Redirected from Game problems and solutions)
Jump to navigation Jump to search

Here's a list of notable games that can be problematic. Solutions are provided to the best of our ability.

Nintendo[edit]

Game Boy / Color[edit]

Pinball Deluxe
This game hangs on every single emulator except for inaccurate ones and for SameBoy (Not saying that SameBoy is inaccurate).

Game Boy Advance[edit]

Wario Ware Twisted, Yoshi Topsy Turvy, Koro Koro Puzzle
Motion control emulation for these games were not implemented until myBoy and mGBA added them. Patched ROMs exist that allow these games to be played with the D-Pad.
Boktai series
Relies on a solar sensor to recharge an in-game gauge that affects gameplay. ROM patches were made to change the solar sensor level with the D-Pad but proper emulation was not implemented until NO$GBA and mGBA added it.
Famicom/Classic NES Series
Throws a Gamepak Error at start-up. It was actually an anti-piracy/emulation tactic. Emulation of the needed behavior was implemented in mGBA.
Mother 3
Sound battles rely on precise timing. Using a flashcart or a 3DS Virtual Console injection would fix that problem because direct access to the actual hardware fixes those timings.

Nintendo DS[edit]

iQue (Chinese DS) games
Throws a glowing error at start-up "Only for iQue". It's a rudimentary form of regional lock that can only be circumvented by opening the ROM with a hex editor and changing one byte at a specific address at the moment.
DSi
Some games outright crash, or show the wrong text (like Shantae showing "Localisation not found"). This can be solved by using a NAND dump. The Camera is still not emulated.
Mag Slide Kid
Has an add-on that no emulator has implemented. Wait for a fix.
Slot-2 (GBA bonuses) not working
Some games like Lunar Knight and Mega Man Star Force removed this feature during localization, so play the Japanese versions instead. Solar sensor bonus in Lunar Knight (aka Boktai DS), however is emulated in melonDS. Read this post for more info.

Pokémon issues[edit]

Specifically Gen 4 (3), Gen 2 remakes (2), and Gen 5 (4).

  • These games rely on cartridge reading speeds more than usual for other games. This causes crashes at start-up that can be circumvented with ARDS cheats in No$GBA, or cause frequent freezes every half hour or so on DeSmuME (meaning the in-game battery save feature is far more preferable to save states). melonDS recently solved the cartridge reading speed emulation and fixes were ported to other emulators.
  • There's also anti-piracy for good measure, which can be disabled with Action Replay codes, and graphical glitches.
  • Unemulated features like the Pokewalk, the Typing with the Pokemon bluetooth keyboard and Download Play event cards.
  • The emulation runs in standard DS clock speed mode on most DS emulators, meaning it doesn't take advantage of the DSi enhancements, though No$GBA recently implemented that partially.
  • The Wi-Fi connectivity features remained under-developed as the devs wanted with their creative differences. Local multiplayer needed for trading monsters between two copies (but also used in other games) isn't possible. This recently got resurrected as a functional WIP feature in melonDS.
  • Online multiplayer was functional in as early as 0.9.7, but rumors spread about a Nintendo letter stating that all forms of multiplayer (even local) were illegal, meaning forks were spread on file sharing sites more than through fork developers themselves. Despite Nintendo's servers going down in 2014, alternative servers covering only the downloadable content still exist. On the bright side, save editors still exist.

DeSmuME-libretro is currently playing catch-up with graphical fixes and some freezing bugs here and there.

Super Nintendo Entertainment System[edit]

Tengai Makyou Zero
The Japanese version of the regular and limited edition releases used to require external graphical packs. This requirement is no longer present in all emulators but ZSNES and an obscure Snes9x Android port used for a Chinese fan-translation. It's fairly supported on all emulators. The game will run a cartridge check the first time it boots. Press either A or B depending on what it shows on screen, and then when it shows you a new message in Japanese, soft reset the emulator. You'll need to do 2 checks like this. After that, an .rtc file is created, and all subsequent boot-ups of the games will play normally.
The English fan-translation so far runs on higan / bsnes, requiring an xml file named the same as the patched ROM, and a manifest.bml file, all under the same directory. The game can be opened from the ROM on standalone higan, and from manifest.bml from RetroArch. Modified builds of Snes9x for Windows (1.5.4) and GX Wii (Source) can boot the ROM alone.

GameCube[edit]

Star Wars: Rogue Leader/Rebel Strike
The games are playable, but suffer from some random hangs and other issues. Click here for Rogue Leader info, and here for Rebel Strike info.

Wii[edit]

Zelda: Skyward Sword
Recommended to use a real Wiimote and Motion Plus to emulate. See details here.
It is possible to use a conventional controller with this build.

Sony[edit]

PS1[edit]

Metal Gear Solid
Rewrites BIOS commands in order to work; a simulated one won't cut it. Do not use the simulated BIOS in PCSX-R. These will just give a blank screen. If you are using a real BIOS and it is still not working, try different ones.
If the game stutters, enable the relevant fix in your sound plugin.
Trying to fight Psycho Mantis on an emulator that can't change controller ports? Die enough times and you will be given another method: shooting statues.

PS2[edit]

Note: If the game is not set in options to 60Hz it might lead to graphic problems from the get go, some examples being God Hand, Metal Slug, Tekken 5 and Destroy All Humans.
Play!
Any issues you encounter with Play cannot be resolved effectively at this time. Use PCSX2.
Ace Combat 4/5/Zero
All three are perfectly playable in software mode, but have major graphical issues in hardware mode. Use software mode if your PC is up to the task. This series used to have hit detection issues, but the latest GIT version, with automatic game fixes turned on, will work.
Jak X can now be booted with a cheat file patch
Lemony Snicket's A Series of Unfortunate Events
EE/IOP EE/FPU Clamping Mode needs to be set to Full in PCSX2, otherwise the button prompt in the first level (i.e. the orphans' room in Count Olaf's mansion) will outright refuse to work.
Metal Gear Solid 2 and 3
Needs a very high end CPU to run at full speed and will run slowly on most. All of the various blades of grass in MGS3 are one cause of its slowdown. Also, various shader effects will only work correctly in software mode.
Ratchet and Clank series
Games have bad visual glitches in hardware mode due to lack of custom mipmap support, and run slowly due to that. Most issues are fixed with software mode.
Shadow of the Colossus
Needs a very high end CPU to run at full speed.
Siren
Daytime levels have a severe graphical glitch causing half of the screen to be obscured, requiring such segments to be run in software mode.
Time Crisis 2
The lightgun add-on isn't implemented in any current emulators at the moment.
Zone of the Enders 1 and 2
Needs a very high end CPU to run at full speed.
Sly 2 and 3
Needs a very high end CPU to run at full speed. Shares similar hardware mode issues found in other Kinetica based games such as Ratchet and Clank and Jak and Daxter.

PSP[edit]

DanganRonpa
Use the latest version of PPSSPP to resolve any problem its had before.
Go to Game Settings > Graphics. Users of Nvidia GPUs should select "Read Framebuffers to Memory (GPU)" under "Rendering Mode". If you use an AMD GPU or Android device, select "Read Framebuffers to Memory (CPU)".
Metal Gear Solid: Peace Walker
In the level "Peace Walker battle 2", one of the last bosses in the game, the boss's life cannot be depleted from the last 2 bars, making it unbeatable. Use the latest version of PPSSPP to resolve this.
Test Drive Unlimited
Needs a very high-end device to run it decently on Android.